| Name | K-Wire Side Cutter – Tungsten Carbide |
| Lead Time | 0-3 days |
| Competitor | ;DP530R;240070107;32125;32-125;3212-50; |
| Specialty | Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers |
| Material Finish | Stainless Steel/Tungsten Carbide |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | seemab surgical |
| Sterility | Non-Sterile |
| Usage | Reusable |
K-Wire Side Cutter – Tungsten Carbide
tungsten carbide jaws, cuts up to 0.047″ (1.1 mm) diameter hard wire, 6″ (15.2 cm)?K-Wire Side Cutter is a versatile instrument that can be used in a variety of surgical procedures. It is specifically designed for use in cutting wire in a particular perpendicular orientation. The unique design of this instrument allows it to comfortably be set flush against the areas where the wire has been inserted and clip it at a length that makes it the best fit. A variety of spinal procedures require for the placement of wire through the newly grafted area to give additional support throughout recovery and this instrument can be used in manipulation and cutting of these wires. Additionally this instrument features tungsten carbide jaws and can cut wires up to a diameter of 1.1 mm.
Description
Shipping & Delivery
Related products
Flat Nose Pliers & Cutter
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm)?Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Locking Pliers
reinforced jaw hinge, self-locking lever w/ adjustment screw & one-handed quick release?Locking Pliers can be used to shape and use wire in many different surgical procedures. A unique feature of this instrument is a reinforced jaw hinge as well as a self-locking lever with adjustment. This makes this instrument highly versatile and able to adapt to a variety of surgical scenarios. Additionally this instrument has a one-handed quick release and is available in three different lengths 7", 8" and 10".
Hercules-Type Wire Cutter – 4.0 mm Wire Max
for drill-wires of 2.5 - 4.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 11" (27.9 cm)?Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum ranging from 2.5 ? 4.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
End Cutter – Barrel Spring, Small, Tungsten Carbide
tungsten carbide jaws, w/ coil spring, maximum capacity 1/16" (1.7mm), 6" (15.0 cm)?End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue areas where it is being used. Additionally this end cutter features tungsten carbide jaws and has a maximum capacity of 1/16".
Cannulated Pin Cutter
end cutting, max cutting capacity 1/16" (1.7 mm), 7-1/2" (19.0 cm)?Cannulated Pin Cutter is a specialized instrument ideally suited or use in procedures of fracture repair or other procedures where a graft is set with a pin. The unique design of this cutter allows for effective end cutting. The entire head portion of the pin can be inserted into the cutter and clipped flush and the remaining clipped portion remains held in the cutter to be removed. The maximum cutting capacity of this pin cutter is 1.7 mm.
Lineman Pliers
side-cutting, maximum capacity 1.6 mm, 8-1/2" (21.6 cm)?Lineman Pliers are a multi-purpose instrument designed for use in surgical procedures to manipulate wire. Many orthopedic surgeries such as fracture repair depend on the use of wire to approximate the fragments and accelerate the healing process. Wires must be manipulated and wrapped to fit the particular scenario where they are needed and these pliers are built for that. They features tungsten carbide jaws and are side cutting with a maximum capacity of 1.6 mm.
Long Jaw Needle Nose Pliers
2-1/4" jaw length, 2.0 mm tip, 7" (17.8 cm)?Long Jaw Needle Nose Pliers are crafted for use in many different orthopedic surgical procedures. The long tapered jaw design gives the surgeon ability to access deeper into the surgical field. These pliers can be used to firmly grasp wire to twist it or to put particular bends into wire to fasten them to bony sites or around fracture repair to confer additionally stability and accelerate the healing time.
Flat Nose K-Wire Pliers
serrated jaws, 7" (17.8 cm), 3.0 mm tip?Flat Nose K-Wire Pliers are instruments ideally suited for use with surgical K-wire. This wire can be used for temporary fixation in some procedures thus giving support through the healing process and then can be removed. Additionally K-wire can be used in permanent fixation and can also be passed through the skin and bone to provide direct traction to the bone itself. In all of this surgical scenarios this instrument will be of optimal function in manipulation and handling of the wire and features serrated jaws which gives added hold and grip to prevent slipping. This instrument is available with or without a grooved jaw.
